Systematic Literature Review: Application of Work System from Lean  Maintenance and its Methodology

Nur Azlina Azlina; Harmein Nasution; Listiani Nurul Huda

doi:10.32734/jsti.v27i1.18203

Authors

Nur Azlina Azlina Universitas Sumatera Utara
Harmein Nasution Universitas Sumatera Utara
Listiani Nurul Huda Universitas Sumatera Utara

DOI:

https://doi.org/10.32734/jsti.v27i1.18203

Keywords:

Lean Maintenance, Maintenance Efficiency, Downtime, Systematic Literature Review

Abstract

Maintenance is an activity in maintaining and repairing a machine, with the most dominant factor being the increase in downtime. This can lead to a decrease in production output and an increase in production costs. Therefore, it is necessary to understand the maintenance repair system on the machine. Reliability-based maintenance is used to plan maintenance intervals for machines, equipment, or components that frequently experience failures. Thus, the maintenance system becomes efficient. This study aims to determine the implementation of Lean Maintenance (LM) in machine maintenance. The method used to review previous studies employs a systematic literature review. The data process was carried out by identifying, evaluating, and interpreting those related to the topic of machine maintenance. Based on the research conducted, machine maintenance using the lean maintenance (LM) approach has been proven in all reviewed scientific articles to show an efficiency increase of 60.7%, a reduction in downtime, and the ability to determine maintenance schedules. The review includes the categorization and application of the lean maintenance approach based on three parameters: technique, principle, and scope. The maintenance tools or techniques most commonly used in waste reduction are Maintenance Value Stream Mapping and Reliability-Centered Maintenance.

Downloads

Download data is not yet available.

References

C. T. N. Siregar, P. Kindangen, and I. D. Palandeng, “Evaluasi Pemeliharaan Mesin dan Peralatan Produksi PT. Multi Nabati Sulawesi (MNS) Kota Bitung,” J. EMBA J. Ris. Ekon. Manajemen, Bisnis dan Akunt., vol. 10, no. 3, p. 428, 2022, doi: 10.35794/emba.v10i3.42362.

L. Patidar, V. K. Soni, and P. K. Soni, “Maintenance strategies and their combine impact on manufacturing performance,” Int. J. Mech. Prod. Eng. Res. Dev., vol. 7, no. 1, pp. 13–22, 2017.

Janasekaran, Shamini, Lim, and S. Hong, “Reduction of Non Added Value Activities During Machine Breakdown to Increase Overall Equipment Efficiency,” Lect. Notes Mech. Eng., 2019, doi: 10.1007/978-981-13-8297-0_30.

Y. Jiang, K. Liu, J. Huang, D. Zhao, W. Yang, and Y. Wang, “Intelligent in-process enhancement technique for machining efficiency in CNC machine tools based on spindle power,” Mech. Syst. Signal Process., vol. 216, no. May, p. 111495, 2024, doi: 10.1016/j.ymssp.2024.111495.

I. Ammelia, “Pengaruh Efisiensi Biaya Pemeliharaan Mesin Terhadap Produktivitas Produksi,” J. Pendidik. Akunt. Keuang., vol. 4, no. 2, p. 36, 2019, doi: 10.17509/jpak.v4i2.15422.

H. Q. Karima and F. Romadlon, “Optimizing the Preventive Maintenance Scheduling Based on Dynamic Deterministic Demand in The Cement Manufacturing,” J. Ilm. Tek. Ind., vol. 20, no. 1, pp. 109–118, 2021, doi: 10.23917/jiti.v20i1.13894.

H. M. Dara, A. Raut, M. Adamu, Y. E. Ibrahim, and P. V. Ingle, “Reducing non-value added (NVA) activities through lean tools for the precast industry,” Heliyon, vol. 10, no. 7, p. e29148, 2024, doi: 10.1016/j.heliyon.2024.e29148.

W. Azhari, M. A. adi, A. C. Dewi, and H. Mahfud, “Hoist Tulangan Machine Maintenance Design Using Lean Maintenance Method (Case Studi Of Pt. Xyz),” IOP Conf. Ser. Mater. Sci. Eng., vol. 1125, no. 1, p. 012111, 2021, doi: 10.1088/1757-899x/1125/1/012111.

J. G. Blanco and T. Dederichs, Lean Maintenance: A Practical, Step-by-Step Guide for Increasing Efficiency. CRC Press is an imprint of Taylor & Francis Group, an Informa business, 2018. doi: 10.4324/9781315178226.

C. Davies and R. M. Greenough, “Measuring the effectiveness of lean thinking activities within maintenance,” no. November, 2016.

S. Ghayebloo and H. Babaei, "Technical note : Determining maintenance system requirements by viewpoint of availability and lean thinking: A MODM approach, "vol. 6, no. 11, pp. 65-75, 2010.

T. G. Tendayi and P. C. J. Fourie, “the Combined Ahp-Qfd Approach and Its Use in Lean Maintenance,” SAIIE Proc., vol. 9, no. 9, p. 12, 2013, [Online]. Available: http://conferences.sun.ac.za/index.php/saiie25/SAIIE25/paper/viewFile/554/202

A. Shagluf and A. P. Longstaff, “Maintenance strategies to reduce downtime due to machine positional errors,” Proc. Maint. Perform. Meas. Manag. Conf. 2014, pp. 111–118, 2014, doi: 10.14195/978-972-8954-42-0_16.

P. A. Wicaksono and F. Ariska, “Lean Maintenance Pada Transmission Case Td Line Untuk Mereduksi Waste Guna Meningkatkan Efektivitas Dan Efisiensi Perawatan Mesin Di Pt Mitsubishi Krama Yudha Motors Manufacturing,” 2020.

M. Fernandes, D. Correia, and L. Teixeira, “Lean maintenance practices in the improvement of information management processes: a study in the Facility Management division,” Procedia Comput. Sci., vol. 232, no. 2023, pp. 2269–2278, 2024, doi: 10.1016/j.procs.2024.02.046.

S. Mostafa, J. Dumrak, and H. Soltan, “Lean Maintenance Roadmap,” Procedia Manuf., vol. 2, no. February, pp. 434–444, 2015, doi: 10.1016/j.promfg.2015.07.076.

J. P. Womack and D. T. Jones, “Lean Thinking—Banish Waste and Create Wealth in your Corporation,” J. Oper. Res. Soc., vol. 48, no. 11, pp. 1148–1148, 2010, doi: 10.1038/sj.jors.2600967.

M. Cerqueira, P. Silva, and S. Fernandes, “Systematic Literature Review on the Machine Learning Approach in Software Engineering,” Am. Acad. Sci. Res. J. Eng., vol. 85, pp. 370–396, 2022, [Online]. Available: http://asrjetsjournal.org/

S. Oktarina, F. H. Mustofa, and L. Fitria, “Usulan Rute Distribusi Kopi Arabika Premium Menggunakan Metode Nearest Neighbour dan Tabu Search di PT. X,” J. Online Inst. Teknol. Nas., vol. 4, no. 2, pp. 149–159, 2016.

N. Baluch, C. S. Abdullah, and S. Mohtar, “TPM and Lean Maintenance - A Critical Review,” Interdiscip. J. Contemp. Res. Bus., vol. 4, no. 2, pp. 850–857, 2012, [Online]. Available: http://search.ebscohost.com/login.aspx?direct=true&db=bth&AN=83518185&site=ehost-live

P. D. Karningsih, W. Puspitasari, and M. L. Singgih, “Cost-Integrated Lean Maintenance to Reduce Maintenance Cost,” J. Optimasi Sist. Ind., vol. 22, no. 1, pp. 69–80, 2023, doi: 10.25077/josi.v22.n1.p69-80.2023.

D. A. Kurniawati and M. L. Muzaki, “Analisis Perawatan Mesin dengan Pendekatan RCM dan MVSM,” J. Optimasi Sist. Ind., vol. 16, no. 2, p. 89, 2017, doi: 10.25077/josi.v16.n2.p89-105.2017.

A. Hendrasnoto, A. I. S. M, and Kulsum, “Usulan Perbaikan Maintenance Untuk Menurunkan Downtime Pada Mesin Pay – Off Reel Dengan Pendekatan Lean Maintenance Di Pt Xyz,” Tek. Ind., vol. 5, no. 3, pp. 224–233, 2017.

Nico Pranata Mulya, “Machine Maintenance Scheduling Design Using Reability Centered Maintenance (RCM) method and Maintenance Value Stream Mapping (MVSM) at XYZ,” Int. J. Econ., vol. 2, no. 1, pp. 87–101, 2023, doi: 10.55299/ijec.v2i1.430.

Zenna Rasyid Y., Y. N., and E. P.W, “Analisis Aktivitas Perawatan Mesin Circural Loom Dengan Metode Maintenance Value Stream Mapping,” vol. 12, no. 0, pp. 1–23, 2016.

B. Hafid, T. Siagian, D. Derlini, and R. SIlvany, “Pengukuran Dampak Penerapan Sistem Total Productive Maintenance Terhadap Waktu Henti Mesin,” J. Rev. Pendidik. dan Pengajaran, vol. 7, no. 3, pp. 6798–6805, 2024.

J. Igba, K. Alemzadeh, I. Anyanwu-Ebo, P. Gibbons, and J. Friis, “A systems a Reliability-Centred Maintenance (RCM) of wind turbines,” Procedia Comput. Sci., vol. 16, pp. 814–823, 2013, doi: 10.1016/j.procs.2013.01.085.

G. Clarke, G. Mulryan, and P. Liggan, “Lean Maintenance – A Risk-Based Approach,” vol. 30, no. 5, pp. 1–6, 2010.

L. Yile, X. XueHang, and Z. Lei, “Lean Maintenance framework and its application in clutch maintenance,” Proc. Int. Conf. Inf. Manag. Int. Conf. Inf. Manag. Innov. Manag. Ind. Eng. ICIII 2008, vol. 3, pp. 230–232, 2014, doi: 10.1109/ICIII.2008.84.